• 20mm (¾ inch) PVC 90 degree elbow
• For use on all grades of PVC pressure pipe

Tips

• Ensure pipe end is cut square, debur and chamfer as required
• To ensure correct assembly of joint, mark pipe at a distance equal to the socket depth
• Dry assemble to check pipe end fits inside socket (i.e. tight fitting)
• Clean pipe end and inside of socket using a clean cloth freshly moistened with priming fluid
• Apply solvent cement to cover both surfaces in full (i.e. pipe end and inside socket)
• Immediately assemble, pushing pipe home to the full depth of pipe socket
• Hold bonded joint in position for at least 30 seconds
• Do not disturb for 5 minutes
• Wait the recommended curing time before pressure testing (i.e. HR Type P Solvent Cement recommends 24 hours before pressure testing)