Features
- Hunter I-25 pop-up sprinkler
- Radius: 11.9m to 21.6m
- Arc adjustments from 50 degrees to 360 degrees
- 4 inch (10cm) pop-up
The I-25 gets the job done with power, efficiency, and commercial-grade reliability. With a robust watering radius of 11.9 to 21.6m, this rotor can be used in a variety of applications and environments. Its compact, highly durable design comes with an optional stainless-steel riser for tough-as-nails strength. A standard check valve is built in, and a wide selection of high-performance nozzles are available on request.
- Patented automatic arc return feature returns the turret back to the original arc pattern if vandalized
- Non-strippable drive mechanism is protected from damage if turned in the opposite direction of travel
- Part and full circle in one model for flexibility across landscapes and reduced inventory
- Colour coded nozzles make identification easy
- Drain check valve prevents low-head drainage (up to 3 m of elevation)
Tips
Arc Adjustments: Adjustable heads are preset to 180 degrees. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made before installation.
- Using the palm of your hand, rotate the nozzle turret counter clockwise to the left stop to complete any interrupted rotation cycle
- Rotate the nozzle turret clockwise to the right stop. This is the fixed side of the arc. The nozzle turret must be held in this position for arc adjustments. The right stop does not change
To increase the arc
- Insert the plastic key end of the Hunter wrench into the adjustment socket (hole with + - symbols)
- While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full 360 ̊ turn of the wrench will increase the arc 90 ̊.
- Adjust to any arc between 40 ̊ and 360 ̊
- The wrench will stop turning, or there will be a ratcheting noise, when the maximum arc of 360 ̊ (full circle) has been reached
To decrease the arc
- Insert the plastic key end of the Hunter wrench into the adjustment socket (hole with + - symbols)
- While holding the nozzle turret at the right stop, turn the wrench counter-clockwise. Each full 360 ̊ turn of the wrench will decrease the arc 90 ̊.
- Adjust to any arc between 40 ̊ and 360 ̊
- The wrench will stop turning, or there will be a ratcheting noise, when the minimum arc of 40 ̊ has been reached
Refer YouTube installation videos
Hunter Rotor Adjustment Video
Hunter I series Rotor
Hunter I25 Rotor Plastic Riser Adj & F/Circle 100mm Pop-up
- Brand: Hunter Industries
- SKU: I25-04
- Availability: In Stock
- Uom: EA
-
$155.80
- Ex GST